keronpromos.blogg.se - september 2022

This is a sign that the links have been through-hardened, with no ductility in the core. There’s absolutely no way this chain can be cut with a near-silent bolt-cropped attack, even with our 42” tool.Ī sledge-hammer will break this chain, two good solid hits in our testing causing it to shatter. When coiled up, the chain covers a 32cm diameter. If you’re using a ground anchor, check that it’s big enough to accept a 22mm chain few are. The sheer bulk of the chain makes it difficult to handle, and you need to make sure your wheel is close to what you’re chaining to. The chain’s only available in this 1.5m length, and weighs a hefty 17.28kg (11.52kg per meter) without the lock. Doing this means they can just snip the ties and take the bike away.Īlso, if your lock has been glued up, don’t leave the bike as the chances are the thieves are waiting for you to be forced to leave your motorcycle unsecured. Note that if you leave your lock accessible outside, always check it before use thieves have been known to remove the sleeve when the lock’s not in use, cut a link out then replace it with zip-ties, before covering it up again. The lock body is case hardened on the outside to resist bolt cutter attack and flexible enough at its core to resist twist attack.Weighing a total of 21.62kg, it’s unlikely anybody is going to carry this chain and lock with them day-to-day like other 22mm chains, it’s intended for home use, or perhaps at work.

The market leading tight tolerances that Squire can achieve enables it to outperform all other padlocks of a similar size.

CNC precision manufactured lock body - the 100mm thick case-hardened lock body is precision manufactured by Squire on high performance, cutting edge CNC machines at its UK operation.

Corrosion resistant padlock tested to BS EN12320:2012 Grade 5 after 480 hours salt spray testing.

Heavy duty, weatherproof, anti-corrosion finish - the black electrophoretic anti-corrosion finish protects the lock body on the inside and the outside giving maximum corrosion protection.

Precision engineered, solid brass 6-pin cylinders with anti-pick and anti-bump features.

Maximum security dual cylinder - unique dual-cylinder design.

Maximum anti-corrosion satin chrome finish shackle recommended for harsh outdoor conditions.

Boron alloy steel is super high-performance steel and is 80% tougher than mild steel.

20mm diameter hardened boron alloy steel shackle - case hardened boron alloy steel gives maximum anti-cut resistance on the hard outside and anti-twist resistance from the flexible inner core.

Machined to give a smooth appearance which is easy to handle.

Protected closed shackle - virtually total protection for the shackle against all forms of attack.

It is the latest addition to the Squire Stronghold® high security padlock range, which comes in many sizes and shackle variants, with solid hardened steel lock body, electrophoretic anti-corrosion finish, hardened boron alloy steel shackle, anti-drill protection and high corrosion resistance for harsh environments. That’s equivalent to taking the weight of two London double decker buses.

Remarkably, the SS100CS weighs a massive 4.3kg of British steel and is capable of a tensile pull of over 24 tonnes (independently tested). Keys can be held by different people and the lock cannot be opened unless both keys are presented.

Both versions can be keyed-alike and master-keyed. Or they can be keyed to differ, where the padlock is operated using two different keys. It can have ‘same key’ cylinders, where both cylinders operate using the same key. The benefit of this dual cylinder padlock is it offers a wide range of uses. And it has achieved the highest security CEN Grade 6 rating.Įach cylinder offers 250,000 key differs, giving a combined total of 625million differs. This dual cylinder closed shackle padlock with 100mm wide solid steel lock body is the first ever to achieve the highest Loss Prevention Certification Board (LPCB) SR4 standard (not as a set). Situations that are high risk, such as perimeter gates, warehouses, outbuildings, shipping containers, heavy machinery, commercial vehicles and for high value property including motorcycle security at home. It is designed for locations where maximum security is a priority. Our super heavy-duty SS100CS is universally respected as the world’s strongest production padlock.